FB-AFB离心化工泵

产品详细介绍
 
FB-AFB离心化工泵产品概述:

      FB、AFB型泵适用于不含有固体颗粒介质,介质温度为O℃～120℃,进口压力不大于2kg/cm2。AFB型不锈钢耐腐蚀离心泵是在F型耐腐蚀泵的基础上改进设计的,均采用新型的付叶轮动力轴封装置,属单级单吸悬臂式耐腐蚀离心泵。化工泵与输送介质接触的过流部份零件,均采用1Cr18Ni9Ti材料制造。用于输送不含固体颗粒,有腐蚀性液体,被输送介质温度为-20℃～130℃,泵进口压力不大于2kg/cm2。

FB-AFB centrifugal chemical pump Product Overview:

       FB, AFB pumps for medium does not contain solid particles, the medium temperature of O ℃ ~ 120 ℃, inlet pressure of not more than 2kg/cm2. AFB corrosion-resistant stainless steel centrifugal pump is based on the F-type Naifushibeng improved design, are used to pay the new power impeller shaft seal device is a single-stage single-suction cantilever centrifugal pump corrosion. The pump is in contact with the transport medium over-current part of the parts are used 1Cr18Ni9Ti material. For the delivery of solid particles, corrosive liquid, is transported medium temperature of -20 ℃ ~ 130 ℃, the pump inlet pressure is not greater than 2kg/cm2.

 
 
　   FB-AFB离心化工泵使用范围:
　　广泛应用于化工、石油、冶金、轻工、合成纤维、环保、食品、医药等部门。该类产品具有性能稳定可靠、密封性能好,造型美观,使用检修方便等优点。为提高产品质量、减少跑、冒、滴、漏,防止污染,改善环境,发挥很大的作用。